CTHB81 18-26 Ton Hydraulic Hammer (Bonnie)
Price: |
US $ 4000/Piece |
Min Order: |
1/Piece |
Pay Type: |
L/C,T/T |
Prod Model: |
CTHB81 |
Type: |
Claw Hammer |
Hammer Material: |
Brass |
Explosion-proof: |
Explosion-proof |
Product Description
CTHB81Triangle type medium breaker
Item | unit | value |
weight | kg | 920 |
Total weight | kg | 1767 |
Size | mm | 2480×590×1335 |
Hydraulic flow | L/min | 120~180 |
Hydraulic oil pressure | Kg/cm2 | 160~180 |
Impact Rate | bmp | 350~500 |
Drill rod diameter | mm | 140 |
Adapt to | ton | 18~26 |
Features:
- The work tool is held in alignment by the replaceable thrust bush and thrust ring. The ABEX thrust bush is long, resulting in more true alignment of the work tool, which significantly reduces wear compared to shorter thrust bush in other brands. Being longer means it is also stronger and more tolerant of sideways leverage forces (from incorrect operation by the operator)
- Both-sided steel housing covered the main body of hammer. Eight (8) side bolts tighten the body with housing as one body. Upper side of housing is stronger than other brands with additional steel bars. Lower side of housing is reinforced by double-layered steel plate.
- ABEX work tool is easily removed / replaced by removing the stop pins and the tool pins
- ABEX thrust bush is of unique design. It can be changed externally. There is no need to dissemble the internal main body. This saves significant time, is technically simple, and reduces risk of contamination / incorrect reassembly. These are significant benefits and are unique to ABEX breakers.
- - KS & ISO 9001:2009/ISO 9001:2008
- KS & ISO 14001:2009/ISO 14001:2004
- CE marking: Machinery Directive 98/37/EC, Hydraulic Breakers (Registered No: K8610/M14)
Our company is a big exporter of various kinds of steel and iron products, metal mineral.
One of our strongest parts is steel rolling mill and machinery/ equipment & metal processing.
Here are our steel products:
Steel plate/sheet/coil, steel pipe/tube, steel bar/rod, section steel (angle bar, flat bar, channel bar, I-beam, H-beam, wire rod/steel wire and stainless steel products.
The steel rolling mill offered by us can produce steel bar/rod, section steel (angle bar, flat bar, channel bar, I-beam, H-beam, steel rails and wire rod/steel wire.
Meantime, we are also dealing with the forging, casting, machining, heat treatment, melted-zinc-bath, other equipment (motor, reducer, etc) and furnace (heating, annealing, tempering, melting and so on).
If you have any doubts, please contact us without hesitate and send us the full inquiry with the detailed specification, material, size & quantity.