| Prod Model: |
cutting saw |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Weight: |
575g |
| Dimensions: |
260*60*53mm |
| Type: |
Cutting Saw |
Product Description
I. Introduction
RA_DSII electric swing plaster saw is the new generation product designed and researched according to the clinical operation experience. The motor adopts double insulation protection device and guarantees the safety of operators and the wounded. The product features strong motive power, smart design, stable operation, small vibration, low noise, safety and reliability.
II. Technical Parameters
1. Input current: 220V-50Hz, rated input power: 125W;
2. Maximum swing times: ≥ 15, 000 times/min;
3. Swing angle of the plaster saw: 60± 10
4. Whole machine weight: 575g;
5. Overall dimensions: 260*60*53mm
III. Application Method
1. During operation, hold the saw firmly, lay it on the cut plaster slowly and cut the plaster perpendicularly. Don't cut it through once if you are not sure (although the saw has soft tissue protection function).
2. Cut the plaster perpendicularly, lift it and move forward, lay it on the lower cut section slowly, repeat the above course until finishing the task.
3. When the saw teeth are obtunded after a long time of use, loosen the cap and rotate the saw blade counter clockwise with a 5mm socket hexagonal wrench, then tighten it clockwise.
IV. Do's and Don'ts
1. The main engine and electric wire are forbidden to be dipped in disinfectant for disinfection or high temperature disinfection.
2. Clean the surface with soft cotton cloth and neutral soap solution after use. Organic solvent and hard materials are forbidden.
3. The saw shall be stored in ventilated and dry environments instead of places higher than 40° C. Lay it into the box and avoid collision and impact during transportation.
4. Generally speaking, stop use if output frequency reduction, impotent output or high noise appears during operation, or it will damage the motor or even hurt the operators.
5. If the saw hasn't been applied for a long time or it is applied in damp environment, the insulation resistance between the machine cover and winding shall be measured with a 50ohm meter. If it is less than 7ohm, drying treatment shall be done to the winding until the insulated resistance is above 7ohm.
V. After-sales Service Commitment
The saw can be repaired freely within half a year of quality problems occur. Besides, it adopts one-year guarantee period. During the guarantee period, only the material will be charged.
Suzhou Connect Medical Technology Co., Ltd. is an integrated of scientific research, production and sales high-tech enterprises, located in the beautiful Yangtze River Delta region. And Connect Company has invested more than eight million yuan and introduced advanced technology from abroad to produce KNT medical poly bandage and splint.
The indicators, such as packing, valid, fixed strength and toughness have reached international advanced level. The products are known as "Quality Trustworthy Product", widely used in more than 400 well-known hospitals at home. Under the support of foreign-funded enterprises, the company distributie our productions to the international market, exported to the United States, South Korea, Iran, Russia and Southeast Asia and other regions.
Connect based on taking people as a dominant factor, and strengthen human resources development, introduction and continuous training of senior management personnel to improve the team, "the quality of imported products, the prices of domestic", "quality first, the customer first, integrity and win-win cooperation" for the purpose of the production and operation.
Development is our targets; It must depend on the extensive cooperation, and welcome partners to our team. We adhere to the principle of mutual benefit and sincere to listen to your views and plans, we share our results together. Rely on scientific and technological innovation, and we are able to create our national brand.
