| Prod Model: |
MG50702 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Set Contains: |
11 Piece/Item |
| Update Method: |
by Internet |
| Type: |
Fan Clutch Wrench Set |
Product Description
Mercedes/BMW Fan Clutch Service Set
This set allows servicing of different areas of repair which require a specialty tool due to their confined locations.
Allows removal of lock nuts on thermo viscous radiator fans found on Mercedes-Benz and Ford vehicles.
Works on M111, OM604, OM605 and OM606 Mercedes-Benz engines from C and E classes with 36mm opening.
This clutch Holding Tool allows the technician to hold the water pump pulley in place while loosening the radiator fan to allow removal and replacement of the visco-coupling on the cooling fan.
Allows the water pump pulley to be held in place to permit the release of the fan.
Also allows the water pump pulley to be held in place while the radiator fan is loosened.
Holes at 38mm and 44.5mm permits work on BMW M10, M20, M30 and many other late model vehicles.
Allows the removal and installation of the fan clutch assembly.
The special slim shaft handle design permits easy work in tight areas.
Works on Mercedes-Benz M103, M104, M119 and M120 with 65mm opening.
BMW Fan Clutch Holding Tool allows the removal and installation of the thermo-viscous fan on BMW and Ford with 32mm opening.
Welcome to Magma Tooling.
We are your turnkey manufacturer located in Ningbo, China. When it comes to outsourcing in China, we are your solution. Consider Magma Tooling, your own factory in China, our facility is logistically located across from the exporting hub in Ningbo, one of the largest port in China.
Magma Tooling was founded in 2001 as mold maker/molding manufacturer/mold manufacturer/mold supplies, specializing in getting products from ideas to drawing, molding to prototype, and mass production to exporting. We can help on mold making/plastic tooling/die casting mold, cover home appliance, automotive parts, industrial products and healthcare equipments. No project is too small for us to tackles, we have in house team of expertise ready to assist your needs. We can take your rough drawings to 2D/3D drawing and polishing it to the ways your products needed to be according to your dimensions. After your art works are finalized and satisfied, at your convenient our factory is equipped with molding equipments to help you with your prototype. Our facility has the technology to assist you with any inconceivable molding needs. We will mail you your prototypes for your inspection before production can begin. Magma Tooling can accommodate from drawing to molding, prototyping, and manufacturing your products or hand tools.
Magma Tooling also can assist you if you are not happy with your current Original Equipment Manufacture (OEM), we can still help you at any stages of your production. Stop searching, you have come to the right place since "Time Is Money. " Our team will do the rest, picking up where others OEM left off.
After years of struggling and encouraged by our customers, we combined our knowledge on mold production and built hand tools/automotive tools line in 2004, we named our line of products "MAGMA TOOLS. " with good feedback and hard work, with great team of manufacturing expertise, in March of 2004, we produced our line of chrome socket set, ratchet handle, 46 and 94 pieces of socket set. Since then, we have produced quality socket set and exported to clients all over the North American and European markets. We can help mass produce your hand tools according to your specific needs, with your branding logo to identify your products.
We welcome your inquiring about produce your project(s) with Magma Tooling. Contact us today by email, phone, fax us to get your quote, and we can start today with your project. We look forward bring your ideas to the market, no projects are to small for us.
Best Regards,
Jason Hsiao
President and CEO
