| Prod Model: |
JHW-SSD-240 |
| Type: |
Solid State Disk |
| Application: |
Laptop |
| Installation: |
Internal |
| Interface Type: |
SATA |
| Size: |
2.5 |
| Cache: |
64MB |
| SSD Cache: |
8GB |
| Rotationl Speed: |
7200*10rpm |
| Capacity: |
240GB |
| Interface Rate: |
6GB/S |
Product Description
Iterm | Solid State Drive |
Capacity |
240GB |
| Model NO. | JHW-SSD-240 | Size | 2.5inch |
| SSD Cache | 4GB | Rotational speed | 7200*10rpm |
| Interface type |
SATA 3 |
Flash interface |
Flash |
| Interface rate |
6GB/s |
Type |
MLC |
| Read | Up to 500MB/s | Installation | internal |
| Write | Up to 280MB/s | Application | laptop |
| DRAM Interface | 16-Bit Wide DRAM Interface |
DRAM |
Up to 256MB DDR3 |
| ECC | Bch 40Bits Ecc | MTBF | >2100000hours |
Guarantee |
3 years | 4kb Random Read/Write
IOPS |
up to 88000/48000(peak value) |
Introduction1, Features Form Factor
2.5" SATA Solid State Drive 2.5"
99.8mm*69.8mm*6mm
Totally compliant to standard SATA hard disk drive
Available Capacities
240GB (MLC NAND Flash)
ECC
BCH 40 bits ECC
High Performance
Up to 600MB/S burst transfer rate in NGFF 6GB/S
Sustained Read Performance:up to 510mb/s
Sustained write Performance:up to 285mb/s
4kb Random Read/Write IOPS up to :88000/48000(peak value)
High Rellability
MTBF>2100000hours
Endurance :In normal operation condition , guarantees for 3 years product lifetime for
half the SSD capacity sequential write per day.
Dynamic , static and active balanced wear-leveling strategy.
Bad-Block Management
S.M.A.R.T support
Temperature Ranges
Commericial Temperature Range: 0ºC-70ºC 2. Contents1. General Description
1) Physical Description
2) Systerm performance
3) Environmental Specifications
4) Reliablity
5) Physical Dimensions
6) CHS Parameter
7) Drive grometry
2. Fuctional Block Diagram
3. Physical dimension diagram
4. Terms of Warranty
5. Electrial interface
1) Electrial interface
6. Feature Descriptions
1) Wear Leveling
2) Bad block management
3) Endurance
4) Ecc
5) Standards Compliance
7. Supported ATACommands
1) Identify Device2) Identify Device
3) Ata power model
4) Sata Link power states
5) Power mode mapping
6) Ata Sleep Mode Behavior
7) ATAIDLE Mode Behavior
1 General DescriptionThe ARTANIS 46XT series SSD provides you ultimate performance and ultra-high reliability over
traditional hard disk drive by achieving up to 510/300 MB/s sequential read/write rate and
integrates protections technologies such as bad block management and wear-leveling. The 46xt
series makes it the best high performance and high reliability solution for ultrabook related
products in the market
For reliability. ARTANIS 46XT series SSD integrates dynamic ,static and active (inactive)
balanced wear leveling technology to ensure an equal usage of the flash memory cells to extend the
SSD life time .Moreover , it provides features such as ECC algorithm, bad block management
algorithm and MTBF>2100000 hours to assure overall reliability
ARTANIS 46xt series SSD consists solely of semiconductor devices , which means it doesn`t have
any mechanical part such as platter (disk),motor and suspension as traditional hard disk drive ,Its
characteristics such as high performance ,Capacity,reliability,ruggedness,low power
comsumption,small from factor and ultra slim thickness of 3.5mm make it the best storage
solution with ultra slim design , Due to ARTANIS 46xt series` SATA interface , it is the best
solution to replace traditional 2.5"HDD.
1) Physical Description
The important component of ARTANIS 46xt SSD includes a flash controller and NAND flash
memory modules . The controller works with host system to allow data to be written to and read
from the flash memory modules through a (SATA) interface .The SSD is offered in a 2.5" form
factor with a SATA connProduct show
How to order?
1. Pls send email or chat with us via skype, and let us know your requirements on models, quantities, colors.
2. We will reply you with proforma invoice based on your order request
3. Kindly check the PI, and if everything is ok, we will deliver the goods to you ASAP after got your payment.
Why choose us?
- The design of our goods are all original
-4 times 100% QC inspection before shipping
-Best quality&Best Service with competitive price
Shenzhen Junhaowei is a company with over than 5 years rich experience which specializing in R&D\manufacturer and sales of plastic products, Located in Baoan District, Shenzhen City. Have over 3000 square meters plant with a group of skillful and experience workforce. More than 100 employees, 15 injection molding machines to ensure the OEM production of all kinds of plastic products.
Due to the expanding of the production, we extended the balancing scooter products since 2013. To supply new and hot style self balancing scooter to customers all over the world with our competitive factory price. Monthly production capacity is over 20000 pieces. All its products pass many international quality standard certification, such as RoHS, CE, FCC, etc.
We assure excellent quality, high-efficient capabilities with on-time production. To fulfill our customer's needs.
