| Prod Model: |
MG50943 |
| Set Contains: |
11 Piece/Item |
| Handle Material: |
Chrome Vanadium(Cr-V) |
| Bits Material: |
S2 Steel |
| Structure: |
Straight Type |
| Type: |
Impact Screwdriver |
| Screw Head Type: |
Slotted,Phillips |
| Brand: |
Magma |
| Use Place: |
Car Workshop/Garage |
Product Description
11 Pcs Impact Screwdriver SetTo use simply tap tail of handle with hammer, ture head to tighten and loosen screw.
Set Includes:
1 Pc 1/2" Dr. Impact driver with a bit holder(1/2"x8mm hexagon).
6 Pcs 36mm Length Bits: PH2, PH3, PH4, Slotted 6mm, Slotted 8mm, Slotted10mm.
4 Pcs 80mm Length Bits: PH2, PH3, Slotted 8mm, Slotted 10mm.
Material:
Handle made from chromium vanadium steel.
Bits made from S2 steel.
------------------------------------------------------------------------------------------------------------------------------------------
An impact driver is a tool that delivers a strong, sudden rotational and downward force. In conjunction with toughened screwdriver bits and socket sets, they are often used by mechanics to loosen larger screws (bolts) and nuts that are corrosively "frozen" or over-torqued. The direction can also be reversed for situations where screws have to be tightened with torque greater than a screwdriver can reasonably provide.
Manual impact drivers consist of a heavy outer sleeve that surrounds an inner core that is splined to it. The spline is curved so that when the user strikes the outer sleeve with a hammer, its downward force works on the spline to produce turning force on the core and any socket or work bit attached to it. The tool translates the heavy rotational inertia of the sleeve to the lighter core to generate large amounts of torque. At the same time, the striking blow from the hammer forces the impact driver down into the screw reducing or eliminating cam out. This attribute is most beneficial for Philips screws which normally cam out as part of their design. It is less beneficial for flat head, also known as common, screws and is not beneficial at all for most other types.
Welcome to Magma Tooling.
We are your turnkey manufacturer located in Ningbo, China. When it comes to outsourcing in China, we are your solution. Consider Magma Tooling, your own factory in China, our facility is logistically located across from the exporting hub in Ningbo, one of the largest port in China.
Magma Tooling was founded in 2001 as mold maker/molding manufacturer/mold manufacturer/mold supplies, specializing in getting products from ideas to drawing, molding to prototype, and mass production to exporting. We can help on mold making/plastic tooling/die casting mold, cover home appliance, automotive parts, industrial products and healthcare equipments. No project is too small for us to tackles, we have in house team of expertise ready to assist your needs. We can take your rough drawings to 2D/3D drawing and polishing it to the ways your products needed to be according to your dimensions. After your art works are finalized and satisfied, at your convenient our factory is equipped with molding equipments to help you with your prototype. Our facility has the technology to assist you with any inconceivable molding needs. We will mail you your prototypes for your inspection before production can begin. Magma Tooling can accommodate from drawing to molding, prototyping, and manufacturing your products or hand tools.
Magma Tooling also can assist you if you are not happy with your current Original Equipment Manufacture (OEM), we can still help you at any stages of your production. Stop searching, you have come to the right place since "Time Is Money. " Our team will do the rest, picking up where others OEM left off.
After years of struggling and encouraged by our customers, we combined our knowledge on mold production and built hand tools/automotive tools line in 2004, we named our line of products "MAGMA TOOLS. " with good feedback and hard work, with great team of manufacturing expertise, in March of 2004, we produced our line of chrome socket set, ratchet handle, 46 and 94 pieces of socket set. Since then, we have produced quality socket set and exported to clients all over the North American and European markets. We can help mass produce your hand tools according to your specific needs, with your branding logo to identify your products.
We welcome your inquiring about produce your project(s) with Magma Tooling. Contact us today by email, phone, fax us to get your quote, and we can start today with your project. We look forward bring your ideas to the market, no projects are to small for us.
Best Regards,
Jason Hsiao
President and CEO
