| Prod Model: |
180#-1200# |
| Grit: |
400# |
| Copper Reduction: |
0.45um |
| Ra(Um): |
0.25um |
| Rz(Um): |
2.0um |
| Type: |
Roller Brush |
| Wire Material: |
Nylon |
| Shape: |
Long |
| Usage: |
PCB Manufacturing |
| Application: |
PCB Manufacturing and Hardware |
| Color: |
Gry |
Product Description
Jiejun nylon brushes are manufactured by improt Dupont or other well known brand abrasive 66nylon wires and adopted the most advanced knitting technology.
HN nylon brush
Usage
Mainly apply to surface treatment before dry filmsand paints, deburring after drilling, pressplate cleaning.
Features
1.Long life.
2.Bend board edges or broken chill bits will not damage it.
3.Chemical resistance.
Brush Size : O. D. : 3" up to 14"
Length : up to 80"
I.D. : any ( by customer's need)
Grit#:180#--2500# silicon carbid or aluminium oxide
Diamond dressing board
Jiejun diamond dressing board is manufactured by plating diamond on stainless steel directly. It is designed for dressing any kind of brush to get a more even brush surface within short time. It is with the highly abrasive ability and longer life than other competition product.
When is the brush necessary to be dressed?
1. Brush becomes bigger at both end of the brush than the center part
2. Brush damaged by the edge of plate
3. The shape of brush become elliptic
4. The surface of brush becomes dirty.
Customer size as required, both single side and double sides
Spiral nylon brush
The spiral nylon roll can be made in two ways:
1.free spiral
2.sprial mounted around a aluminium core.
The material used is non abrasive nylon of white, normally with filament of thickness 0.2 and 0.3mm.
Features:
1.non directional finishing
2. increase micro roughness
3.suitable for fine line technology
4 precise concentricity
5.it can cleaning PCB, LCD and glass
Jiejun non-woven brushes are manufactured by improt 3M or other well known brand material and adopted the world's most advanced formation technology.
HC/THC non-woven brush
Mainly apply to remove the plugging resin, deburring and polish the surface of SUS press plate.
Features:
1.Long life and high efficiency
2.very uniform"finishing quality of treated surface
3.Avoid projections that create problems in next process phases
4. Keep the flatness of the circuit in the presence holes
5. Keep as much as possible uniform the collar of the hole(avoiding any ovality)
6.It can be used togther with ceramic brush or sanding belt, which makes more efficency on cutting and suface finishing.
The size and grit can be customized.| product series | grit# | 400# | 600# | 800# |
| HC | copper reduction(um) | 0.3 | 0.2 | 0.1 |
| Ra(um) | 0.3 | 0.3 | 0.2 |
| Rz(um) | 2.5 | 2.0 | 2.0 |
| THC | copper reduction(um) | 0.6 | 0.4 | |
| Ra(um) | 0.3 | 0.25 | |
| Rz(um) | 2.5 | 2 | |
HD non-woven brush
Mainly apply to deburring after drilling, cleaning , deoxidation, cleaning before solder resist process, gold finge.| grit# | HD-400# | HD-600# | HD-800# | HD-1200# | HD-2000# |
| copper reduction(um) | 0.6 | 0.45 | 0.4 | 0.2 | 0.15 |
| Ra(um) | 0.3 | 0.25 | 0.2 | 0.15 | 0.1 |
| Rz(um) | 2.6 | 2.0 | 1.5 | 1.3 | 0.9 |
| | | | | | |
| | | | | | |
Removing residual copper "nodules" after plating
Removal of built-up resin ink spots in SBU process
Removing black oxide from IVH(internal via holes) and BVH(blind via holes) process
Ceramic brush
jiejun Tech. the unique company produces ceramic brush which was adopted by advanced imported technology from Japan. we seek the goal of "low costs high efficiency".Superior ceramic strength by production with the new bonding method(long-life formation - Removal of hole plugging ink of PCB circuit board
- Precision grinding of surface following copper plating
- Leveling build-up product grinding
- Removal of bur and other dust - precision grinding of other large surfaces
Usage:
1.To remove the plugging ink, resin, and black film.
2.To smooth the surface of build up, IVH, Pre-preg.
3.To smooth the surface of additive-processd PCB.
4.To deburr the hole and to remove foreign matter after plated.
5.To polish the surface of SUS press plate.
Features:
1.Long life (2-4times life)and high efficiency.
2.Very uniform finishing quality of treated surface.
3.No damages on edges of the hole.
4.Perfect preparation for next process.
5.Impact resistance, high dencity construct.
6.No plugging the hole which would be caused by non-woven brush.
The size and grit can be customized:
Size: 2"*5"*650--1400mm
3"*6"*610--1400mm
Grit: 240#-3000#| product series | grit# | 400# | 600# | 800# | 1200# | 2000# |
| B6 | copper reduction(um) | 0.6 | 0.45 | 0.4 | 0.2 | 0.15 |
| Ra(um) | 0.3 | 0.25 | 0.2 | 0.15 | 0.1 |
| Rz(um) | 2.6 | 2 | 1.5 | 1.3 | 0.9 |
| B10 | copper reduction(um) | 1.1 | 0.7 | 0.6 | 0.45 | 0.25 |
| Ra(um) | 0.35 | 0.25 | 0.15 | 0.15 | 0.1 |
| Rz(um) | 2.5 | 1.8 | 1.4 | 1.3 | |
OEM PCB FINISHING LINE
Guangzhou Jiejun Electronic Technology Co., Ltd is a professional corporation specializes in developing, producing and promoting the abrasive brush roll which are used in PCB industry for more than 10 years. It has attracted a large number of top technical talents. Jiejun also undertake the process of plugging hole at vacuum condition and removing exceeded resin for our PCB clients.
The very close cooperation with major PCB manufactures and many famous machine manufactures and rich experience on removing exceeded resin have allowed Jiejun to achieve a deep knowlege on this field, which lead us sum up the best solution to our customers needs.
Through our year by year's effort, Jiejun has become a leader in PCB abrasive industry. Our company also gets high reputation from our client, special in the largest PCB manufactures, such as FOUNDER, TRIPOD, Elec & Eltek.
Company to "manage the high demand, development and manufacture of high quality starting point" for the purpose to serve the constantly updated PCB demand.
We sincerely hope to cooperate with you in this filed. Hand in hand, create brilliance!
